PC
Polycarbonate
Tough functional and transparent components.
ENGINEERING PLASTICS INJECTION MOLDING
Precision molding for functional plastic components using PC, PA, POM, PBT, PPS and other engineering thermoplastics.
From material and DFM review to injection mold manufacturing, mold trials, dimensional inspection and repeat production, Arktech supports OEM teams with integrated tooling and molding services.

Material Capabilities
Engineering thermoplastics are selected according to mechanical, thermal, dimensional and application requirements. Arktech reviews material grades, part geometry and tooling conditions before confirming the molding approach.
PC
Tough functional and transparent components.
PA6 / PA66
Mechanical and structural parts.
POM
Gears and moving components.
PBT
Electrical and technical housings.
PC/ABS
Product housings and functional components.
PA-GF / PBT-GF
Structural and reinforced components.
PPS
Heat-resistant technical applications.
PPSU / PEEK
Specialized engineering applications.
Available for material and project feasibility review.
The exact supplier, grade, technical data sheet, compliance needs and availability must be confirmed for each project before tooling or production approval.
View Material Selection GuideEngineering & Process Control
Engineering plastics require coordinated material selection, tooling design, process development and part validation. Our engineering review focuses on project-specific requirements rather than generic processing assumptions.

Material grade, shrinkage behavior, moisture sensitivity and dimensional requirements are reviewed during project planning.
Part geometry, gate selection, cooling, venting and ejection are evaluated according to tooling and production requirements.
Material preparation, trial conditions and molding parameter adjustments are evaluated during sampling and process development.
Critical dimensions, part fit and sample approval requirements are reviewed using project-specific inspection documentation.
Molded Part Applications
Engineering plastics are used for functional components requiring mechanical performance, dimensional stability or application-specific material properties.

Housing geometry is reviewed around wall transitions, fastening features, visible surfaces and mating interfaces.

Moving and rotating component requirements are reviewed around geometry, fit, wear surfaces and assembly needs.

Structural geometry and load paths are reviewed with the specified resin and reinforcement grade before tooling decisions.

Technical housings are planned around interfaces, fastening features, sealing edges and project-specific material requirements.
Integrated Manufacturing
Tooling, molding and inspection requirements are coordinated around the approved part data, exact material grade and agreed project scope.

Precision injection tooling is developed around part geometry, material requirements and production objectives.
Explore mold manufacturing
Plastic injection molding from 25–550T supports project-specific sampling and repeat production requirements.
Explore plastic injection molding
Mold trials, sample inspection and engineering feedback help verify molded parts against agreed project requirements.
View mold trial and validationQuality records and inspection scope are agreed around the customer drawing and project requirements. Review quality documentation and inspection records.
Real Project Experience
These published projects show real tooling and molded-part programs. Material details are stated only where the project record confirms them.

A multi-cavity tooling project focused on repeated housing geometry, cavity balance and dimensional validation.
View project
A tooling and molded-component project reviewed around assembly interfaces and critical drawing characteristics.
View project
A connected-device enclosure project covering visible surfaces, assembly features and molded housing validation.
View projectFAQ
Project decisions depend on the part design, exact supplier grade and agreed functional and inspection requirements.
Projects using PC, PA6 or PA66, POM, PBT, PC/ABS, reinforced grades and selected higher-performance polymers can be reviewed. Suitability depends on the exact supplier grade, part requirements, availability and agreed project scope.
Selection starts with the mechanical, thermal, dimensional, environmental and compliance requirements. Supplier data and the exact proposed grade are then reviewed with the part geometry and tooling plan.
PA-GF, PBT-GF and other reinforced grades can be reviewed for suitable projects. Fiber content, wear considerations, geometry, surface requirements and the specific supplier grade must be evaluated before approval.
Yes. Project review can cover part geometry, material-related shrinkage, gate and cooling strategy, venting, ejection, dimensional risks and the agreed tooling requirements before steel release.
Arktech supports injection mold manufacturing, mold trials and plastic part production. The exact tooling, machine, material, inspection and production scope is confirmed for each project.
Provide 3D data, a dimensioned drawing, exact resin grade or performance requirements, critical dimensions, mating interfaces, appearance criteria, estimated volume and any inspection requirements.
START YOUR PROJECT
Share your CAD files, material requirements, estimated production volume and critical specifications. Our engineering team will review the available project information and advise on tooling and molding feasibility.